ANIMALS LARGE

Quick view
Buffalo
from $19.75
Quick view
Bear Paw
from $18.50
Quick view
Antler
from $19.75
Quick view
Donkey Right
from $18.50
Quick view
Bear Left
from $8.00
Quick view
Buffalo
$8.00
Save $9.00
Quick view
Horse in the Wind
$19.00 $10.00
Quick view
Panda Bear (7.8mm)
$9.00
Save $9.00
Quick view
Fox Face 9mm
$19.00 $10.00
Save $9.00
Quick view
Prancing Horse
$19.00 $10.00
Save $9.00
Quick view
Deer Looking Back
$19.00 $10.00
Quick view
Horseshoe
from $18.50
Quick view
Koala
from $19.75
Save $9.00
Quick view
Elephant
$19.00 $10.00
Quick view
Democrat Donkey
from $19.75
Quick view
Lion
$35.00
Quick view
Zuni Bear - Right (7.8mm)
$8.00
Quick view
Steer Horns
from $19.75
Quick view
Horse Head Left
from $19.75
Quick view
Rino Left
from $18.50
Quick view
Steer Head
from $18.50
Quick view
Wild Boar
from $19.75
Quick view
Sheep #1
from $19.75
Quick view
Kangaroo
from $18.50
Buffalo
Buffalo
Buffalo
Buffalo
Buffalo
Buffalo

Buffalo

ADS-141-01

$19.75
46 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Bear Paw
Bear Paw

Bear Paw

ADS-137-01

$18.50
34 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Antler
Antler

Antler

ADS-56-01

$19.75
63 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Donkey Right
Donkey Right

Donkey Right

ADS-234-R

$18.50
54 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Bear Left
Bear Left
Bear Left
Bear Left
Bear Left
Bear Left

Bear Left

X5

$8.00
8 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Buffalo
Buffalo

Buffalo

35

$8.00
40 in stock
Metal Design Stamp on 1/4" or 3/8" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Horse in the Wind
Horse in the Wind

Horse in the Wind

AG3-01

$19.00 $10.00
12 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Panda Bear (7.8mm)
Panda Bear (7.8mm)

Panda Bear (7.8mm)

SDS73

$9.00
2 in stock
Metal Design Stamp on 1/4" or 3/8" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Fox Face 9mm
Fox Face 9mm

Fox Face 9mm

AG17-01

$19.00 $10.00
54 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Prancing Horse
Prancing Horse

Prancing Horse

AG44-01

$19.00 $10.00
5 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Deer Looking Back
Deer Looking Back

Deer Looking Back

AG43-01

$19.00 $10.00
7 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Horseshoe
Horseshoe

Horseshoe

ADS-38

$18.50
58 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Koala
Koala

Koala

ADS-134-01

$19.75
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Elephant
Elephant
Elephant
Elephant

Elephant

AG19-01

$19.00 $10.00
15 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Democrat Donkey
Democrat Donkey

Democrat Donkey

ADS-108-01

$19.75
70 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Lion
Lion

Lion

ADS-369

$35.00
99 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Zuni Bear - Right (7.8mm)
Zuni Bear - Right (7.8mm)

Zuni Bear - Right (7.8mm)

R3

$8.00
3 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Steer Horns
Steer Horns

Steer Horns

ADS-245

$19.75
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Horse Head Left
Horse Head Left

Horse Head Left

ADS-233-L

$19.75
58 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Rino Left
Rino Left

Rino Left

ADS-231-L

$18.50
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Steer Head
Steer Head

Steer Head

ADS-246

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Wild Boar
Wild Boar

Wild Boar

ADS-213-01

$19.75
72 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Sheep #1
Sheep #1
Sheep #1
Sheep #1

Sheep #1

ADS-140-01

$19.75
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Kangaroo
Kangaroo

Kangaroo

ADS-133-01

$18.50
50 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.