Jewelry Stamping Press

• This press accepts stamps up to 5/8" square or round and rectangular stamps up to 1" X 5/8" or smaller.
• For example, you could use a stamp that is 5/8" X 3/4", or 1/2" X 3/4", etc. Key point is one side has to be 5/8" or less.
• Smaller, less bold Stamps can be pressed in with just the handle. 
• For tough jobs like bold stamps on stainless you can use a hammer in conjunction with the handle - See Video demonstration
• Already own a 1 ton press?  You can purchase our modified ram to use with your 1 ton press.  Fits most 1 ton presses including that from Harbor Freight.  To see this select "Stamping Press Accessory" from  the drop down menu under "Stamping Presses /jigs"  on the home page.
• See harborfreight.com to review their Arbor Press.
• There is no difference between this press and the one advertised for knife-makers and locksmiths.  
• Stamps and Letter sets can ship with this press at no extra shipping charge.

• Good Choice if you already own a 1-Ton Arbor Press. Change out the Ram you already have with this Modified Ram to manage your Steel Stamping. This Ram accepts stamps up to 5/8" square or round and rectangular stamps up to 1" X 5/8" or smaller. For example, you could use a stamp that is 5/8" X 3/4", or 3/4" x 3/8", etc. Key point is one side has to be 5/8" or less.
• Knife Makers, Locksmiths, and Hand Stamped Jewelry Artists alike will realize improved stamping consistency while keeping their hands clear of the striking zone.
• You Must already have a 1-Ton Press or purchase your own 1-Ton Press to be able to use this Modified Ram.
• This Press fits most 1 ton arbor presses including the 1 ton Arbor Press from Harbor Freight.   If you want to Purchase the Harbor Freight Press you can get it on-line if you do not have one in your area.    harborfreight.com
• 
  

• This is a great tool to help with alignment of your image on the blank and help assure an even impression.
• This jig is small, will fit in the palm of your hand, and weigh only about 1 lb.
• The jig can be bolted to your work-bench (optional) and takes up very little bench space.
• The jig will accept round or square stamps up to 5/8".
• Minimum stamp length is 2-3/8". There is no maximum stamp length.
• Work great for stamping on softer metals like Aluminum, Copper, Brass, Silver, Pewter, etc.If you are stamping stainless, we suggest the Jewelry Stamping Press, over this jig.

• MODIFIED RAM - Good Choice if you already own a 1-Ton Arbor Press. Change out the Ram you already have with this Modified Ram to manage your Steel Stamping. This Ram accepts stamps up to 5/8" square or round and rectangular stamps up to 1" X 5/8" or smaller. For example, you could use a stamp that is 5/8" X 3/4", or 3/4" x 3/8", etc. Key point is one side has to be 5/8" or less.
  
• Knife Makers, Locksmiths, and Hand Stamped Jewelry Artists alike will realize improved stamping consistency while keeping their hands clear of the striking zone.
• You Must already have a 1-Ton Press or purchase your own 1-Ton Press to be able to use this Modified Ram.
• This Press fits most 1 ton arbor presses including the 1 ton Arbor Press from Harbor Freight.   If you want to Purchase the Harbor Freight Press you can get it on-line or in store.    harborfreight.com
• JEWELRY STAMPING BLOCK - Dimensions are approximately 4" X 4" X 3/8" giving you plenty of space to lay out your blanks. Made of Precision Ground, High Carbon Tool Steel and "HARDENED" to Rockwell 60 via a special heat treat process that takes the steel in excess of 2,000 degrees before oil quenching and tempering. Just try putting a dent in this bad boy! Ain't happening! Buy it once and be done with it!!!
• This stamping block is also a nice compliment to our Jewelry stamping press for those who do not like the standard round/slotted anvil that comes with it. Just lift the round anvil off the press and lay this in it's place. You can scroll through the pictures to see an example of this.