DESIGNS BY CATEGORY

You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Viking Helm of Awe

ADS-257

$19.75

58 in stock

Pro Series - Metal Design Stamp on a Square Shank.

You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Guitar

ADS-252 5

$22.00

57 in stock

Pro Series - Metal Design Stamp on a Square Shank.

You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Fox Face 9mm

AG17-01

$19.00 $10.00

54 in stock

Avant Garde - Metal Design Stamp on a Square Shank.

NOTE: Size listed in options represents the widest part of the image.
Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
All excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Avant Garde stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Teepee

I-58

$8.00

4 in stock

Metal Design Stamp on 1/4" or 3/8" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Straight Arrow

I-14

$8.00

7 in stock

Pro Series Metal Design Stamps on 3/8", 1/2", and 5/8" round Tools

Produced from high carbon tool steel for long life.
Rated for use on stainless steel or any other non-hardened metals.
Sharp cutting blades assure ease of stamping and clean crisp images.
Deeper engraving depth assures you get only the image, and not the background of the stamp.
Knurled grip eliminates opportunity for hands sliding on the tool during stamping.
Made in the USA at our shop in Boise, Idaho.
Stamps work well with our Jigs and presses.
Stamps come with a light coating of oil to prevent rusting.

Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Chalice (King's Cup)

U-19

$8.00

2 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Yin Yang (4.5mm)

A45

$8.00

18 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Radiation Symbol (4.5mm)

B42

$8.00

4 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Infinity Symbol (4.5mm)

S-16

$8.00

27 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Lightning Bolt (4.5mm)

$8.00

3 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Indian Symbol (4.5mm)

I-75

$8.00

3 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Triangle (4.5mm)

B20

$8.00

11 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Diamond (4.5mm)

$8.00

9 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Chinese Character (4.5mm)

WM-36

$8.00

30 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Triangle (4.5mm)

T-22

$8.00

4 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Circle Like

M-16

$8.00

14 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Corner

M-8

$8.00

8 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Flower (4.5mm)

B45

$8.00

4 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Arrow Like (4.5mm)

B36

$8.00

2 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Road Runner (4.5mm)

A57

$8.00

6 in stock

Metal Design Stamp on 1/4" Round tool.

Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Call Us

Email Us

Contact Us

DESIGNS BY CATEGORY

Pine Cone

Viking Helm of Awe

Guitar

Fox Face 9mm

Teepee

Straight Arrow

Chalice (King's Cup)

Yin Yang (4.5mm)

Radiation Symbol (4.5mm)

Monotype Corsiva Upper Case

French Script Numeric

Courier New Lower Case

Infinity Symbol (4.5mm)

Lightning Bolt (4.5mm)

Indian Symbol (4.5mm)

Triangle (4.5mm)

Diamond (4.5mm)

Chinese Character (4.5mm)

Triangle (4.5mm)

Circle Like

Corner

Flower (4.5mm)

Arrow Like (4.5mm)

Road Runner (4.5mm)