DESIGNS BY CATEGORY

Quick view
Bear Paw
from $18.50
Quick view
Jeep
from $20.00
Quick view
Mountain Range
from $22.00
Quick view
Compass
from $19.75
Quick view
Compass
from $19.75
Quick view
Trees
from $19.75
Quick view
Mountains
from $19.75
Quick view
Trailer
from $20.00
Quick view
Tram Car
from $19.75
Quick view
Trail Sign
from $19.75
Quick view
Tent
from $19.75
Quick view
Teepee
from $19.75
Quick view
Sunrise
from $19.75
Quick view
Shovel
from $19.75
Quick view
Sail Boat
from $19.75
Quick view
Picnic Table
from $19.75
Quick view
Paw
from $19.75
Quick view
Lighthouse
from $19.75
Quick view
Lighter
from $19.75
Quick view
Lantern
from $19.75
Quick view
Knife
from $19.75
Quick view
Kayak
from $19.75
Quick view
hatchet
from $19.75
Quick view
Folding Knife
from $19.75
Bear Paw
Bear Paw

Bear Paw

ADS-137-01

$18.50
34 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Jeep
Jeep
Jeep
Jeep

Jeep

ADS-68-01

$20.00
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Mountain Range
Mountain Range
Mountain Range
Mountain Range
Mountain Range
Mountain Range

Mountain Range

ADS-127-01

$22.00
67 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Compass
Compass

Compass

ADS-45-01

$19.75
69 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Compass
Compass

Compass

CS-03-01

$19.75
72 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Trees
Trees

Trees

CS-26-01

$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Mountains
Mountains

Mountains

CS-16-01

$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Trailer
Trailer
Trailer
Trailer

Trailer

ADS-22-01

$20.00
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Tram Car
Tram Car

Tram Car

CS-25-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Trail Sign
Trail Sign

Trail Sign

CS-24-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Tent
Tent

Tent

CS-23-01

$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Teepee
Teepee

Teepee

cs-22-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Sunrise
Sunrise

Sunrise

CS-21-01

$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Shovel
Shovel

Shovel

CS-20-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Sail Boat
Sail Boat

Sail Boat

CS-19-01

$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Picnic Table
Picnic Table

Picnic Table

CS-18-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Paw
Paw

Paw

CS-17-01

$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Lighthouse
Lighthouse

Lighthouse

CS-15-01

$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Lighter
Lighter

Lighter

CS-14-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Lantern
Lantern

Lantern

CS-13-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Knife
Knife

Knife

CS-12-01

$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Kayak
Kayak

Kayak

CS-11-01

$19.75
72 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

hatchet
hatchet

hatchet

CS-10-01

$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Folding Knife
Folding Knife

Folding Knife

CS-09-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.