DESIGNS BY CATEGORY

Quick view
Tree
from $18.50
Quick view
Tree
from $18.50
Quick view
Vine
from $18.50
Save $9.00
Quick view
Palm Tree
$19.00 $10.00
Quick view
Mountains with trees
from $22.00
Quick view
Branch and leaves
from $18.50
Quick view
Tree
from $18.50
Quick view
Tree of Life
from $19.75
Sold Out
Leaf 5
$19.00 $10.00
Quick view
Cactus Solid Left
from $18.50
Quick view
Roots 2
from $18.50
Quick view
Roots 1
from $19.75
Quick view
Flower Outline
from $18.50
Quick view
Branches #4
from $22.00
Quick view
Cactus Solid Right
from $18.50
Quick view
Cactus Right
from $18.50
Quick view
Tree
from $18.50
Quick view
Tree of Life 7.8mm
$9.00
Quick view
Fir Tree 4.5mm
$8.00
Quick view
Tree of Life #2
from $19.75
Quick view
Tree of Life
from $19.75
Quick view
Palm Tree (4.5mm)
$8.00
Quick view
Tree Large (4.5mm)
$8.00
Quick view
Tree Small (3mm)
$8.00
Tree
Tree

Tree

ADS-189-01

$18.50
43 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Tree
Tree

Tree

ADS-193-01

$18.50
57 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Vine
Vine

Vine

ADS-198-01

$18.50
51 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Palm Tree
Palm Tree

Palm Tree

AG40-01

$19.00 $10.00
4 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Mountains with trees
Mountains with trees

Mountains with trees

ADS-190-01

$22.00
68 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Branch and leaves
Branch and leaves

Branch and leaves

ADS-195-01

$18.50
57 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Tree
Tree

Tree

ADS-188-01

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Tree of Life
Tree of Life

Tree of Life

ADS-24-01

$19.75
72 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Cactus Solid Left
Cactus Solid Left

Cactus Solid Left

ADS-230-L

$18.50
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Roots 2
Roots 2

Roots 2

ADS-248

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Roots 1
Roots 1

Roots 1

ADS-247

$19.75
57 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Flower Outline
Flower Outline

Flower Outline

ADS-239

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Branches #4
Branches #4

Branches #4

ADS-169-01

$22.00
98 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Cactus Solid Right
Cactus Solid Right

Cactus Solid Right

ADS-230-R

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Cactus Right
Cactus Right

Cactus Right

ADS-228-R

$18.50
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Tree
Tree

Tree

ADS-250

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Tree of Life 7.8mm
Tree of Life 7.8mm

Tree of Life 7.8mm

DK-38

$9.00
2 in stock
Metal Design Stamp on 1/4" or 3/8" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Fir Tree 4.5mm
Fir Tree 4.5mm

Fir Tree 4.5mm

A65

$8.00
36 in stock
Metal Design Stamp on 1/4" Round tool.
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Tree of Life #2
Tree of Life #2

Tree of Life #2

AG23-01

$19.75
25 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Tree of Life
Tree of Life

Tree of Life

AG6-01

$19.75
25 in stock
Pro Series - Metal Design Stamps on Square or Rectangular Shanks.
  • CUSTOM SIZE - YOU HAVE OPTIONS! Minimum size for this design is 9.0mm wide X 7.2mm tall. Choose any size between Minimum and the Maximum size of 17.4mm X 14.0mm. Here's how it works: After you have purchased, email us your Order Number and specify Width (horizontal), or Height (vertical) in millimeters. When you call out only Width, or only Height, the entire image will be sized proportionally to that specification.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Palm Tree (4.5mm)
Palm Tree (4.5mm)

Palm Tree (4.5mm)

X54

$8.00
4 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Tree Large (4.5mm)
Tree Large (4.5mm)

Tree Large (4.5mm)

X53

$8.00
3 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Tree Small (3mm)
Tree Small (3mm)

Tree Small (3mm)

X52

$8.00
4 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.