NATIVE AMERICAN

Quick view
Zia
from $18.50
Sold Out
Half Sun Pictograph
from $8.00
Quick view
Buffalo
from $19.75
Quick view
Bear Paw
from $18.50
Quick view
Southwest Pattern
from $19.75
Quick view
Southwest #2
from $19.75
Quick view
Southwest #1
from $19.75
Quick view
Cactus
from $8.00
Quick view
Roadrunner Bird
from $18.50
Quick view
Half Sun Pattern (4.5mm)
$8.00
Quick view
Sun Pattern
from $8.00
Quick view
Indian Sunray Symbol (4.5mm)
$8.00
Quick view
Half Sun Pictograph (4.5mm)
$8.00
Quick view
Indian Symbol (4.5mm)
$8.00
Quick view
Medicine Man
from $8.00
Quick view
Teepee
from $8.00
Save $9.00
Quick view
Kokopelli Indian Dancer (Right)
$19.00 $10.00
Quick view
Bear Left
from $8.00
Quick view
Arrow Head Pictograph (4.5mm)
$8.00
Quick view
Straight Arrow
from $8.00
Save $9.00
Quick view
Feather
$19.00 $10.00
Sold Out
Indian Chief
$19.00 $10.00
Quick view
Coyote Pictograph (4.5mm)
$8.00
Quick view
Thunderbird
from $22.00
Zia
Zia

Zia

ADS-117-01

$18.50
27 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Buffalo
Buffalo
Buffalo
Buffalo
Buffalo
Buffalo

Buffalo

ADS-141-01

$19.75
47 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Bear Paw
Bear Paw

Bear Paw

ADS-137-01

$18.50
34 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Southwest Pattern
Southwest Pattern

Southwest Pattern

ADS-160-01

$19.75
40 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Southwest #2
Southwest #2

Southwest #2

ADS-143-01

$19.75
46 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Southwest #1
Southwest #1

Southwest #1

ADS-142-01

$19.75
44 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Cactus
Cactus

Cactus

S3

$8.00
3 in stock
Metal Design Stamp on 1/4" or 3/8" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Roadrunner Bird
Roadrunner Bird

Roadrunner Bird

ADS-215-01

$18.50
54 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Half Sun Pattern (4.5mm)
Half Sun Pattern (4.5mm)

Half Sun Pattern (4.5mm)

T-4

$8.00
3 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Sun Pattern
Sun Pattern

Sun Pattern

T-33

$8.00
3 in stock
Metal Design Stamp on 1/4" or 3/8" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Indian Sunray Symbol (4.5mm)
Indian Sunray Symbol (4.5mm)

Indian Sunray Symbol (4.5mm)

I-79

$8.00
2 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Half Sun Pictograph (4.5mm)
Half Sun Pictograph (4.5mm)

Half Sun Pictograph (4.5mm)

I-66

$8.00
1 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Indian Symbol (4.5mm)
Indian Symbol (4.5mm)

Indian Symbol (4.5mm)

I-67

$8.00
3 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Medicine Man
Medicine Man

Medicine Man

I-65

$8.00
7 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Teepee
Teepee

Teepee

58SDS

$9.00
4 in stock
Metal Design Stamp on 1/4" or 3/8" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Kokopelli Indian Dancer (Right)
Kokopelli Indian Dancer (Right)

Kokopelli Indian Dancer (Right)

AG31-01

$19.00 $10.00
10 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Bear Left
Bear Left
Bear Left
Bear Left
Bear Left
Bear Left

Bear Left

X5

$8.00
8 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Arrow Head Pictograph (4.5mm)
Arrow Head Pictograph (4.5mm)

Arrow Head Pictograph (4.5mm)

S25

$8.00
4 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Straight Arrow
Straight Arrow

Straight Arrow

I-14

$8.00
5 in stock
Pro Series Metal Design Stamps on 3/8", 1/2", and 5/8" round Tools
  • Produced from high carbon tool steel for long life.
  • Rated for use on stainless steel or any other non-hardened metals.
  • Sharp cutting blades assure ease of stamping and clean crisp images.
  • Deeper engraving depth assures you get only the image, and not the background of the stamp.
  • Knurled grip eliminates opportunity for hands sliding on the tool during stamping.
  • Made in the USA at our shop in Boise, Idaho.
  • Stamps work well with our Jigs and presses.
  • Stamps come with a light coating of oil to prevent rusting.

Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Feather
Feather

Feather

AG25-01

$19.00 $10.00
11 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
  • NOTE: Size listed in options represents the widest part of the image.
  • Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
  • All excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Avant Garde stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Coyote Pictograph (4.5mm)
Coyote Pictograph (4.5mm)

Coyote Pictograph (4.5mm)

S17

$8.00
3 in stock
Metal Design Stamp on 1/4" Round tool.
  • Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
  • Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
  • Made in the USA at our shop in Boise, Idaho.
  • The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
  • Made from high carbon tool steel and heat treated for long life.
  • Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
  • Stamps come with a light coating of oil to prevent rusting.
  • Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.

Thunderbird
Thunderbird

Thunderbird

ADS-163-01

$22.00
70 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.