PRO SERIES DESIGNS

Pro Series, like the Avant Garde series, are custom quality stamps, often with incredible detail. These stamps are good on stainless, and even higher carbon tool steels used by knife makers and blacksmiths. Primary difference between these 2 categories is that Pro-Series are cut slightly deeper and are available in multiple sizes.  

Quick view
Acorn with Leaves
from $19.75
Quick view
Acorn with Leaves
from $19.75
Quick view
Acorns with Leaves
from $22.00
Quick view
Adoption Symbol
from $18.50
Quick view
Basketball
from $18.50
Quick view
Bavarian Lion
from $19.75
Quick view
Beard
from $19.75
Quick view
Beard with Glasses
from $22.00
Quick view
Bottle Cap
from $18.50
Quick view
Branch and leaves
from $18.50
Quick view
Branch with Leaves
from $19.75
Quick view
Branch with leaves (outline)
from $19.75
Quick view
Bullet
from $19.75
Quick view
Carnation
from $19.75
Quick view
Diamond
from $18.50
Quick view
Double Diamonds
from $18.50
Quick view
Fan #1
from $22.00
Quick view
feather
from $18.50
Quick view
Feather
from $18.50
Quick view
Fleur De Lis
from $18.50
Quick view
Heart paw
from $18.50
Quick view
Lavender
from $19.75
Quick view
Lily of the Valley
from $19.75
Quick view
Malvaceae
from $19.75
Acorn with Leaves
Acorn with Leaves

Acorn with Leaves

ADS-202-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Acorn with Leaves
Acorn with Leaves

Acorn with Leaves

ADS-203-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Acorns with Leaves
Acorns with Leaves

Acorns with Leaves

ADS-200-01

$22.00
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Adoption Symbol
Adoption Symbol

Adoption Symbol

ADS-205-01

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Basketball
Basketball

Basketball

ADS-218-01

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Bavarian Lion
Bavarian Lion

Bavarian Lion

ADS-216-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Beard
Beard

Beard

ADS-227-01

$19.75
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Beard with Glasses
Beard with Glasses

Beard with Glasses

ADS-226-01

$22.00
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Bottle Cap
Bottle Cap

Bottle Cap

ADS-221-01

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Branch and leaves
Branch and leaves

Branch and leaves

ADS-195-01

$18.50
58 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Branch with Leaves
Branch with Leaves

Branch with Leaves

ADS-201-01

$19.75
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Branch with leaves (outline)
Branch with leaves (outline)

Branch with leaves (outline)

ADS-196-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Bullet
Bullet

Bullet

ADS-219-01

$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Carnation
Carnation

Carnation

ADS-225-01

$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Diamond
Diamond

Diamond

ADS-187-01

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Double Diamonds
Double Diamonds

Double Diamonds

ADS-186-01

$18.50
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Fan #1
Fan #1

Fan #1

ADS-114-01

$22.00
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

feather
feather

feather

ADS-209-01

$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Feather
Feather

Feather

ADS-210-01

$18.50
54 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Fleur De Lis
Fleur De Lis

Fleur De Lis

ADS-220-01

$18.50
57 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Heart paw
Heart paw

Heart paw

ADS-206-01

$18.50
59 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Lavender
Lavender

Lavender

ADS-194-01

$19.75
56 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Lily of the Valley
Lily of the Valley

Lily of the Valley

ADS-222-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.

Malvaceae
Malvaceae

Malvaceae

ADS-224-01

$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
  • You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
  • NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
  • NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
  • Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
  • Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
  • Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
  • Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
  • Pro Series stamps work well with our Stamping Press and Stamping Jig.
  • Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.