Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Night Sky (no moon)
ADS-208-01
Regular price
$22.00
69 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Right
ADS-237-R
Regular price
$19.75
55 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options!In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Crescent Moon
M-20
Regular price
$8.00
23 in stock
Metal Design Stamp on 1/4" Round tool.
Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Star - Five Point
F-29
Regular price
$8.00
34 in stock
Metal Design Stamp on 1/4" or 3/8" Round tool.
Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Mountain Left
ADS-237-L
Regular price
$19.75
57 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options!In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountains with trees
ADS-190-01
Regular price
$22.00
71 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Sunset
ADS-66-01
Regular price
$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Winding Path
ADS-191-01
Regular price
$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Range
ADS-127-01
Regular price
$22.00
69 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Sun with Rainbow
AG10-01
Regular price
$19.00
Sale price
$10.00
27 in stock
Avant Garde - Metal Design Stamp on a Square Shank.
NOTE: Size listed in options represents the widest part of the image.
Produced from high carbon tool steel for long life, our Avant Garde stamps are rated for stamping stainless or any other non-hardened metal.
All excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Avant Garde stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Lightning Bolt
ADS-13-01
Regular price
$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Star With circle Center (4.5mm)
B49
Regular price
$8.00
7 in stock
Metal Design Stamp on 1/4" Round tool.
Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Raised Star in Circle (4.5mm)
B48
Regular price
$8.00
3 in stock
Metal Design Stamp on 1/4" Round tool.
Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Mountains
CS-16-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Crescent Moon with Star (4.5mm)
A47
Regular price
$8.00
12 in stock
Metal Design Stamp on 1/4" Round tool.
Designs on our 1/4" round tools range from 4.2mm to 4.9mm unless otherwise stated in the options.
Designs on our 3/8" Round tools range from 7.2 to 8.0mm unless otherwise stated in the options.
Made in the USA at our shop in Boise, Idaho.
The standard for over 30 years, these are the stamps that launched the Design Stamp Industry.
Made from high carbon tool steel and heat treated for long life.
Our small designs, on 1/4" tools, allow for multiple stampings on a given stamping blank allowing for more creativity.
Stamps come with a light coating of oil to prevent rusting.
Should your stamp develop rust, clean with a wire brush and vegetable oil. No risk of stamp damage.
Radiant Sun
ADS-256
Regular price
$18.50
60 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options!In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Fiery Sun
ADS-159-01
Regular price
$18.50
50 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Range #5
ADS-174-01
Regular price
$22.00
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Range #4
ADS-173-01
Regular price
$22.00
100 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Range #3
Ads-172-01
Regular price
$22.00
100 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Range #2
ADS-171-01
Regular price
$22.00
98 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Mountain Range #6
ADS-175-01
Regular price
$22.00
100 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
