Pro Series, like the Avant Garde series, are custom quality stamps, often with incredible detail. These stamps are good on stainless, and even higher carbon tool steels used by knife makers and blacksmiths. Primary difference between these 2 categories is that Pro-Series are cut slightly deeper and are available in multiple sizes.
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Livin' The Dream
ADS-96-01
Regular price
$19.75
71 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Strong
ADS-92-01
Regular price
$19.75
71 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Be Kind
ADS-91-01
Regular price
$19.75
71 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Hope
ADS-60-01
Regular price
$19.75
72 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Loved
ADS-83-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Shine
ADS-82-01
Regular price
$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Be Still
ADS-72-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Faith
ADS-58-01
Regular price
$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Believe
ADS-46-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Love
ADS-19-01
Regular price
$19.75
72 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Abide
ADS-85-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Ampersand Plain
ADS-53-01
Regular price
$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Covid-19
ADS-177-01
Regular price
$22.00
98 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Thrive
ADS-90-01
Regular price
$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Empower
ADS-89-01
Regular price
$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Pray
ADS-87-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Press On
ADS-86-01
Regular price
$19.75
75 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Amazing
ADS-76-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Beloved
ADS-75-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Grace
ADS-73-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Joy
ADS-71-01
Regular price
$19.75
74 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Breathe
ADS-63-01
Regular price
$19.75
73 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.
Family
ADS-62-01
Regular price
$19.75
72 in stock
Pro Series - Metal Design Stamp on a Square Shank.
You Have Options! In our world, one size “does not” fit all! That’s why we offer a range of sizes to choose from. Most of our designs come in 3 sizes and some more. If our standard sizes don’t work, Consider the custom option as described below
NEED A CUSTOM SIZE? Email us with your desired size (maximum is 17.5mm X 17.5mm). If your size is possible, we will send an email confirming width and height and advise the tool size that we will use. When requesting size, give us only width, or only height (the most critical of the 2), and we will keep the image proportionally true when sizing it to that dimension. You then purchase using the “Custom Option” for that product, and email us your order #, and the size, that was confirmed to you. We will ship in 1-3 days from confirming your custom size.
NOTE: Sizes listed in options are in the format of “Image Width X Image Height”.
Made in the USA at our shop in Boise, Idaho, our Pro Series stamps are "produced to order" and ship in 1-3 business days.
Produced from high carbon tool steel for long life, our Pro Series stamps are rated for stamping stainless or any other non-hardened metal.
Engraved deep, with excess material around the design beveled off to assure it does not interfere with your stamping process.
Sharp cutting blades assure ease of stamping as well as clean, crisp, images.
Pro Series stamps work well with our Stamping Press and Stamping Jig.
Stamps come with a light coating of oil to prevent rust. Should your stamp ever develop rust, clean with a wire brush and vegetable oil. You cannot damage your stamp with a wire brush.